TR3200 series current probes are used for AC current measurement. The measured current reaches an AC peak value of 2000A, with a bandwidth of 100KHz and a jaw diameter of about 100mm. The standard BNC output interface can be connected to any manufacturer's oscilloscope. Three measuring ranges can be switched to facilitate small current measurement. Add standard accessory BNC to banana socket to realize connection with digital multimeter. Widely used in motor drives, inverters, switching power supplies, avionics and other measurements.
Product Features
• Measurement of harmonic composition in current
• Detecting sinusoidal current waveform
• Measuring the phase shift in a sine wave
• Current of semiconductor switch
• distributed current monitoring
• power bus monitoring
• Monitor harmonics, power and power quality
• Large motor, pump, fan test
• IGBT、MOSFET tube current measurement
 |
Low frequency AC probeStrictly follow the 1MΩ impedance matching specification, perfectly compatible with mainstream brands such as Keysight, Tektronix (Tektronix), Rohde and Schwarz (R & S), completely bid farewell to the brand locking of special probes, adopt bayonet anti-falling design, and seamlessly match the oscilloscope input load to avoid signal attenuation or distortion. |
Three range high current probeOne key switch 20A/200A/2000A high and low range to avoid sampling distortion caused by current mutation! Equipped with a key automatic degaussing and zeroing function. |
 |
 |
Oversized pincer opening100mm industry's largest jaw design, compatible with dense cable, multi-strand wiring harness and special-shaped conductor, perfect adaptation to switching power supply, electric vehicle electronic control and other complex scenes! One-key locking anti-falling structure ensures measurement stability, and engineers are the first choice tool for rapid diagnosis of high-current equipment. |
Numerical measurement functionBNC-banana plug seamless bridge current probe and multi-purpose meter enable mV gear to directly read AC current value, and the voltage-current conversion ratio needs to be manually converted. Get rid of oscilloscope dependence, portable measurement of switching power supply ripple/IoT module power consumption. |
 |
 |
waveform analysisThe causes of current waveform distortion in power system are analyzed. |
| Model | TR3200B | ||
| Bandwidth | 100KHz | ||
| Rise time | ≤3.5μs | ||
| Input Type | AC | ||
| Accuracy | ±3% ±2% ±1% | ||
| Current conversion ratio | 1mV/A 10mV/A 100mV/A | ||
| AC Peak | 2000A | ||
| Maximum operating voltage | 600V CATⅢ | ||
| Jaw diameter | Ø100mm | ||
| Cable length | 150cm | ||
| Interface Type | BNC | ||
| Working environment | 0~40°C,80%orless | ||
| Storage requirements | -10~45°C°C,80%orless | ||
| Weight | 1200g | ||
| Overall dimension | 285X175X40mm | ||
There are currently no application cases available
There are currently no films available
Building 9, No. 269, Xinfeng Road, Xukou Town, Wuzhong District, Suzhou, China
0512-66559708
WeChat customer
Tmall Official Flagship Store
Copyright © 2003-2025 , All Rights Reserved AiYong Instruments (Suzhou) Co., Ltd.
