+ Customer service
Customer service

contact information

Suzhou

address：Building 9, No. 269, Xinfeng Road, Xukou Town, Wuzhong District, Suzhou, China

Telephone：0512-66559708

Technical support

If you have any other questions, you can contact us by email

Contact Email

marketing@tronovo.com

Go to Service and Support

Go to the knowledge center

Standard probes
  1. Home
  2. Product
  3. Standard probes

TR9101A standard probes

100MHz Oscilloscope Probe - Uses interchangeable, low-resistance, gold-plated styli with snap-on rotary grounding wires that allow the user to quickly and manually switch between 1X and 10X. The probe body is made of high-strength plastic, and soft plastic is used at all bending and stress points to ensure the service life of the cable.

Features:
• 100MHz operating frequency
• X1,X10
• The stylus is gold-plated and replaceable
• Includes an "accessory pack" that is perfect for engineers
• Suitable for analog or digital oscilloscopes from 20M to 100MHz

Gold-plated probe contacts

It has lower contact resistance, enhanced electrical conductivity, improved corrosion resistance, and longer service life.

Telescopic probe hook is standard

When testing, it is convenient to hook a certain point on the circuit board, such as the original pins and pin headers on some PCBs, or directly hook the wire, which can measure high safety and free one hand.

Gold-plated grounding springs

Because the oscilloscope's ground clamp and probe loop lead are relatively long and easy to be interfered with, the measured waveform will be distorted, sometimes we want to get a more realistic waveform when it comes in handy, for example, the probe measures the MOS tube drive waveform ringing is relatively large, we can use the ground spring to test in order to rule out and verify whether the ringing here is really so large.

Compatible with any oscilloscope

The probe adopts a standard BNC plug, which can be used with domestic and imported oscilloscopes.

The probe is corrected

Connect the probe to the oscilloscope positive signal output port, and the oscilloscope will produce a square wave signal of 1KHz.
*Use the non-inductive batch adjustment probe to adjust the compensation capacitance lightly, observe the waveform of the signal, and adjust it until it is very regular and straight.

ModelTR9101A
X10 position
Attenuation ratio10:1
bandwidthDC~100M
Rise time3.5nS
Input impedance10MΩ (oscilloscope input impedance 1MΩ)
Input capacitanceApproximately 15pF
Scope of Compensation10 to 20pF
Input voltage300 Vrms CAT II
X1 position
Attenuation ratio1:1
bandwidthDC to 6MHz
Rise time58nS
Input impedance1MΩ (oscilloscope input impedance)
Input capacitanceApproximately 105 pF
Input voltage150 Vrms CAT II
Operating temperature0℃to + 50℃
Humidity85% RH or less
Overall length1.2米
Safety regulationsMeets EN61010-031 CAT II
FittingsOscilloscope probes x1
Probe hook hat x1
Grounding wire x1
Color Wheel x4
Grounding springs x1 Non-inductive batching x1

There are currently no application cases available

There are currently no films available

Tronovo's brand logo features a blue whale as its creative core, representing technology, leaps, development, infinite possibilities, culture, and innovation. The boundless sky, vast ocean, and the blue whale freely leaping out of the water symbolize the future "Tronovo Group," implying an ever-growing vitality. The soaring form, like Tronovo's vigorous upward development, suggests that in the future, Tronovo will strive to become a century-old brand enterprise.

Product

Industry

About

Contact Us

Copyright © 2003-2025 , All Rights Reserved AiYong Instruments (Suzhou) Co., Ltd.