TR3000 series current sensor is used for AC current measurement, the measured current is up to 400A RMS, the maximum pulse current is 100KA, the bandwidth is 50MHZ, the rise time is 200ns, and the diameter of the platinum port is about 50mm; Standard BNC output interface, can be connected to any manufacturer oscilloscope: add the standard accessory BNC to banana socket, which can be connected to a digital multimeter. Widely used in high-end medical multi-band current sensing; Square wave, triangle wave passive mutual inductance, laboratory broadband current research, lightning surge waveform observation, switch short-circuit current detection.
Features:
• Bandwidth:10Hz~50MHz
• Current measurement range: 10mA to 400ARms
• The maximum pulse peak current is 200 KA
• The current conversion ratio is 1V/1A
• Accuracy Class: 1%
• The maximum diameter ∅50mm
• Compatible with BNC interface oscilloscopes
 |
Medium frequency current loopThe current loop provides a universal interface for multimeter-level operational efficiency. The pure AC measurement capability covers the range of 10mA-50A, which is suitable for inverter harmonic analysis, motor start-up current detection and other scenarios. |
Numerical measurement functionThe BNC to banana head has a built-in isolation layer to block the high-voltage risk of the ground loop and ensure the safety of mV measurement of the multimeter. The output signal of the current probe is galvanically isolated and connected to the multimeter. Operation specification: connect the converter head first and then power on. Compatible with Fluke 87V and other high-protection multimeters, the high-voltage motor control cabinet has zero accidents in on-site measurement. |
 |
 |
Precision electronics R&D applications10mA~4000A pulse current coverage, winding mode to improve the sensitivity of small current. It is suitable for laboratory broadband current research, lightning surge waveform observation, switching short-circuit current monitoring, and high-end medical multi-band current induction measurement. |
Start-up current testThe instantaneous current (also known as starting current or stalled rotor current) when the motor is turned on is a key physical phenomenon in the process of motor starting, and its value can usually reach 4~7 times of the rated current. |
 |
| Model | TR3015 |
| Bandwidth | 10Hz~10MHz |
| Rise time | ≤50ns |
| Enter the type | AC |
| Precision | ±1% |
| Current conversion ratio | 50mV/A |
| Minimum RMS | 20mA |
| Maximum RMS | 50A |
| Maximum pulse peak current | 4000A |
| Jaw diameter | ∅14mm |
| Oscilloscope input impedance | 1MΩ |
| Interface type | BNC |
| Jaw diameter | 100cm |
| Working environment | 0~40°C,80%orless |
| Storage requirements | -10~45°C°C,80%orless |
| Weight | 380g |
There are currently no application cases available
There are currently no films available
Building 9, No. 269, Xinfeng Road, Xukou Town, Wuzhong District, Suzhou, China
0512-66559708
WeChat customer
Tmall Official Flagship Store
Copyright © 2003-2025 , All Rights Reserved AiYong Instruments (Suzhou) Co., Ltd.
