TR3000 series current sensor is used for AC current measurement, the measured current is up to 400A RMS, the maximum pulse current is 100KA, the bandwidth is 50MHZ, the rise time is 200ns, and the diameter of the platinum port is about 50mm; Standard BNC output interface, can be connected to any manufacturer oscilloscope: add the standard accessory BNC to banana socket, which can be connected to a digital multimeter. Widely used in high-end medical multi-band current sensing; Square wave, triangle wave passive mutual inductance, laboratory broadband current research, lightning surge waveform observation, switch short-circuit current detection.
Features:
• Bandwidth:10Hz~50MHz
• Current measurement range: 10mA to 400ARms
• The maximum pulse peak current is 200 KA
• The current conversion ratio is 1V/1A
• Accuracy Class: 1%
• The maximum diameter ∅ 50mm
• Compatible with BNC interface oscilloscopes
 |
Industrial-grade current loopsThe BNC standard interface breaks the brand barrier of oscilloscopes and connects all the equipment in the laboratory with one click. The current loop specializes in AC current analysis (bandwidth 10Hz-20MHz), and with magnetic shielding technology to suppress electromagnetic interference, it can still output pure waveforms in strong noise scenarios such as inverters and switching power supplies. The rigid probe construction is not flexible. |
Numerical measurement functionMultimeter mV file BNC to banana head = microcurrent detection weapon! The current probe's output proportional voltage is highly resolved by a 22-bit ADC with a resolution of 0.1mV. It ± 1% accuracy under all working conditions, and is suitable for precision scenarios such as photovoltaic micro-reverse leakage current and medical equipment safety detection. |
 |
 |
Scientific research platformThe current loop focuses on low-voltage AC economical measurement solutions (20MHz bandwidth/±1% accuracy). The rigid construction simplifies the design and improves the sensitivity of small currents to 0.1mA (5-turn winding × 5x gain) with multi-turn winding mode. It is suitable for power supply ripple analysis and standby power consumption test of IoT devices in teaching experiments. |
Measurement of high-frequency signalsHigh-frequency current waveforms reveal the rise/fall times, overshoot, and ringing of digital signals to avoid data errors due to impedance mismatch. |
 |
| Model | TR3022 |
| Bandwidth | 10Hz~20MHz |
| Rise time | ≤20ns |
| Enter the type | AC |
| Precision | ±1% |
| Current conversion ratio | 100mV/A |
| Minimum RMS | 10mA |
| Maximum RMS | 20A |
| Maximum pulse peak current | 2000A |
| Jaw diameter | ∅14mm |
| Oscilloscope input impedance | 1MΩ |
| Interface type | BNC |
| Cable length | 100cm |
| Working environment | 0~40°C,80%orless |
| Storage requirements | -10~45°C°C,80%orless |
| Weight | 380g |
There are currently no application cases available
There are currently no films available
Building 9, No. 269, Xinfeng Road, Xukou Town, Wuzhong District, Suzhou, China
0512-66559708
WeChat customer
Tmall Official Flagship Store
Copyright © 2003-2025 , All Rights Reserved AiYong Instruments (Suzhou) Co., Ltd.
